WARNING Smooth Pro KNOCK OFFS. Read Below: Due to the over whelming success of Genesis Smooth Pro some of our competitors have come up with knock offs of Smooth Pro and they have major issues:
THICKNESS that is needed to Avoid Sagging for flat, smooth ceiling tiles must be 5/32" for 2' x 2' and 3/16" for 2' x 4', Genesis Pro Series Ceiling Tiles are 2' X 2' X 5/32" and 2' X 4' X 3/16"
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) By law no ceiling tile can be used indoors that does not pass the ESTM E84 test that requires for FLAME to be under 25 (0-25) and for Smoke (SDI) to be under 450 (o-450). Ceiling Tiles that are higher than 25 for Flame (FSI) or higher than 450 for Smoke (SDI) will cause you to be liable (legally responsible) for any and all damages, injuries and deaths. 0 Warnings. You may find your insurance not paying due to the use of illegal tiles.
Hospitals, Restaurants and Food Processing Plants should prevent MOLD & BACTERIA, not encourage it by using fiber board tiles. Get rid of those old tiles and upgrade to a ceiling you can keep clean and healthy.
Genesis Spec Sheet - MSDS (pdf) - click to view
Genesis Pro Series (2x2):
Genesis Pro Series (2x4):
We have over 30,000 Satisfied Customers and millions of square feet of ceiling tiles sold to numerous industries including the U.S. government and military, Restaurants, Airlines, Oil Rigs, Universities, Food Preparation Buildings, Commercial Buildings, Bottling Plants, Clean Rooms, Hospitals, Manufacturers, Hotels and more.
Ceiling Tile Minimum Requirements:
Genesis Ceiling Tiles:
Ceilings are classified for Fire Safety using 2 indexes; Flame Spread and Smoke Developed Index. Testing is done in accordance with ASTM E84 (UL 723). The Line Safety Code (NFPA 101) and the International Building Code (IBC Section 803.1) limit the materials for ceilings to 3 classes based on Flame Spread Index and Smoke Developed Index:
Genesis Ceiling Tiles are Class A for Flame Spread Index (FSI 20.1) and Smoke Density Index (SDI 199.9) as detailed in our Spec Sheet.
Made in the U.S., the Genesis Recycled Series consists of high-performance ceiling panels that are both attractive and sustainable. Available in 2x2 and 2x4 sizes, these recycled, rigid PVC panels resist rust, corrosion, mold and mildew. The 2.3 mm panels are available in two colors. The flecked panel is made of 75% recycled material and includes a .012 virgin vinyl skin for a consistent white appearance. The black panel is made of 100% recycled material. The panels are manufactured with a slight curve so the tiles lay flat in a grid and will not sag.
Installation Guide for Genesis Recycled Ceiling Tiles
How do you install Genesis Tiles? They will quickly and easily fit into almost any ceiling grid system. Genesis Panels are lay-in ceiling panels and are available in the same sizes as fiber-based ceiling tiles, 2' x 2' and 2' x 4'.
How do I cut Genesis Tiles? The tile can be trimmed with a utility knife. You may also use a metal angle ruler, score it and snap the tile.
What happens if water condensation on pipes lands on the ceiling panels? The water evaporates and leaves no discoloration and Genesis ceiling panels do not permit the growth of mold and mildew.
How will I know if I have a major water leak? The water will drip between the grid and ceiling tile which will quickly alert you to the problem, as water will drip on the floor. The leak will need to be fixed, but the value of Genesis is that you can dry off the tile and reinstall it, undamaged.
Can I install Genesis Recycled Tiles over other panels? Yes, Genesis Recycled Tiles can be installed in front of an existing tile to reduce installation time.
Can Genesis panels be cleaned? Yes. A mild soap and water solution works well, as do most household cleaners. Just spray the cleaner onto a clean rag and wipe.
Copyright New Ceiling Tiles, LLC. All Rights Reserved. eCommerce Software by 3dcart.